ANDIS Cool Care Plus Spray 439g
ANDIS Cool Care Plus Spray 439g
Couldn't load pickup availability
ANDIS Cool Care Plus Spray 439g
Keep professional clipper and trimmer blades ready for the next service with Andis Cool Care Plus. This convenient five-in-one aerosol combines blade cooling, cleaning, disinfection, lubrication and rust pre-treatment in one maintenance product. The high-pressure nozzle helps clear loose hair and service debris from between blade teeth without removing the blade, while the lubricating formula helps reduce friction and support smooth cutting performance.
Key Features
- Five-in-one care for clipper and trimmer blades.
- Cools hot blades between services.
- Helps clean and disinfect pre-cleaned blade surfaces.
- Lubricates to reduce friction and support smooth blade movement.
- Provides rust pre-treatment to support blade maintenance and longevity.
- High-pressure spray helps remove loose hair from blade teeth.
- Large 439g professional aerosol can for salon and barbershop use.
How to Use
After each use, remove loose hair and debris from the blade. Switch the clipper or trimmer off, hold the can upright 15–20cm from the pre-cleaned blade and spray until the teeth and blade surfaces are wet. Keep the surface visibly wet for 10 minutes, then allow it to air dry. Between full disinfecting applications, use short sprays to cool the blade and blow away loose hair.
Professional Notes
Use only in a well-ventilated area and follow every warning on the can. The aerosol is extremely flammable and pressurised. Keep it away from heat, sparks, open flames and hot surfaces. Avoid contact with eyes, do not puncture or burn the container, and do not spray onto varnished, painted or plastic surfaces unless the product label confirms compatibility.
Specifications
- Brand: Andis
- Product: Cool Care Plus Can
- Format: Five-in-one aerosol blade maintenance spray
- Size: 15.5oz / approximately 439g
- Suitable for: Professional clipper and trimmer blade maintenance
Directions
Directions
After each use, remove loose hair and debris from the clipper or trimmer blade. With the tool switched off, hold the can upright 15–20cm from the pre-cleaned blade and spray until the teeth and blade surfaces are wet. Keep the surface visibly wet for 10 minutes, then allow it to air dry. Between full disinfecting applications, use short sprays to cool the blade and blow away loose hair. Use in a well-ventilated area and follow all warnings on the can.
Ingredients
Ingredients
Composition disclosed in the Andis Cool Care Plus Safety Data Sheet: Ethyl Alcohol (60–65%), Water (15–20%), 1,1-Difluoroethane (10–15%), n-Butane (1–5%), O-Phenylphenol (0.1%), and other proprietary ingredients as disclosed on the product label.
